Bank-ready embroidery unit report under MUDRA Kishor — project cost ₹2–20 Lakh, subsidy, CMA data, DSCR ≥ 1.50 and 5-year projections.
Free preview • No credit card • Ready in 60 seconds
This page provides a comprehensive MUDRA Kishor project report for an embroidery unit (NIC 13993) with a project cost between ₹2–20 lakh. Whether you are an entrepreneur in Surat, Ludhiana, or any textile hub, a bank-ready project report is essential for loan approval under MUDRA Kishor (₹50,001–₹5 lakh). The report includes detailed CMA data, Debt Service Coverage Ratio (DSCR), and 5-year financial projections covering profit & loss, balance sheet, and cash flow. It also outlines the subsidy available under the Credit Guarantee Fund Trust for Micro and Small Enterprises (CGTMSE), which covers up to 85% of the loan amount without collateral. Our format ensures compliance with SBI, Canara Bank, and other public sector banks' requirements, making your loan application seamless.
To qualify for MUDRA Kishor loan for an embroidery unit, the applicant must be an Indian citizen aged 18 or above. The business should be a non-corporate, non-farm small enterprise with a project cost between ₹2–20 lakh. The loan amount under Kishor category is ₹50,001 to ₹5 lakh. There is no collateral required as the loan is covered under CGTMSE. The unit should be engaged in textile embroidery activities (NIC 13993). Banks typically require a minimum of 1 year of business experience or relevant skill training. For new entrepreneurs, a detailed project report with market analysis and viability is mandatory.
The total project cost for an embroidery unit includes machinery (computerized embroidery machines, thread, frames), working capital (thread, fabric, dyes), and preliminary expenses. For a typical unit in Ludhiana or Surat, machinery cost may range from ₹1.5–3 lakh for a single-head machine, plus ₹50,000–1 lakh for working capital. The financing structure under MUDRA Kishor is: bank loan up to 90-95% of project cost (subject to ₹5 lakh maximum loan), and promoter's contribution of 5-10%. For example, a ₹3 lakh project may require ₹15,000–30,000 from the borrower. Subsidy is not direct but interest subvention of 2% for women and SC/ST entrepreneurs may apply under certain state schemes.
Submit the following documents with your MUDRA Kishor application: 1) Project report in the prescribed format with CMA data and projections. 2) KYC documents (Aadhaar, PAN, Voter ID). 3) Proof of business address (rent agreement or utility bill). 4) Quotation for machinery from suppliers. 5) Bank statement of last 6 months (if existing business). 6) Caste certificate (if applicable for subsidy). 7) Skill certificate or training proof (e.g., from PM Vishwakarma or ITI). 8) Photographs of workspace. Ensure all documents are self-attested. Banks may also request a detailed business plan with market analysis for embroidery services in your locality.
Step 1: Prepare a bank-ready project report using our format. Step 2: Visit your nearest public sector bank (SBI, Canara, PNB, Bank of Baroda) or apply online via Udyamimitra portal. Step 3: Submit the application with all documents. Step 4: Bank officer verifies the project and may conduct a site visit. Step 5: Loan is sanctioned within 15-30 days. Step 6: Disbursement in one or two tranches (machinery first, then working capital). Step 7: Repayment in 3-5 years with monthly installments. Interest rate ranges from 9-12% per annum. Ensure timely repayment to build credit score for future loans.
Every report is formatted to the exact standards required by Indian banks and government departments.
A complete 14-section project report — the same document your bank officer will read. Every table below is real: the repayment schedule, the DSCR, the CMA workings, the balance sheet. Generate yours free, then pay ₹499 for the clean copy.
Project Report
Consumer electronics repair, servicing & spare-parts retail
Vaishali Nagar, Jaipur, Rajasthan
Submitted to the Branch Manager · Punjab National Bank, Vaishali Nagar, Jaipur
The unit has been in operation since 2019 and currently services 20–25 jobs a day from a 350 sq.ft. ground-floor shop, with a recorded customer base of 600+ households in the Vaishali Nagar catchment. The promoter proposes to expand the workbench capacity, add board-level diagnostic equipment and carry a spare-parts inventory so that 70% of repairs can be completed same-day instead of the present 3-day turnaround.
The project is assessed at a cost of ₹10.00 lakh, financed by a ₹8.00 lakh MUDRA Tarun term loan and ₹2.00 lakh of promoter's own contribution (20%). At the projected turnover the unit services its debt 5.87 times over on average, against the 1.25 minimum, and breaks even at 62% of Year-1 sales — leaving substantial cushion against a demand shortfall.
Recommendation: the proposal is technically feasible, commercially viable and financially sound. It is recommended for sanction of a term loan of ₹8.00 lakh repayable in 60 monthly instalments.
| Particulars | Basis | Amount (₹) |
|---|---|---|
| Renovation & civil work | 200 sq.ft. additional area, electrical, ESD flooring | 1,20,000 |
| Diagnostic & repair equipment | As per quotations — Annexure IX | 2,40,000 |
| Computers, software & service tools | 2 systems, billing software, tool kits | 80,000 |
| Furniture, air-conditioning & display fixtures | Counter, racks, 1.5 T AC | 60,000 |
| Margin money for working capital | Stock, receivables & operating cash | 5,00,000 |
| Total project cost | 10,00,000 |
A 5% contingency is built into the civil and equipment estimates. All capital items are supported by three quotations each.
| Source | Amount (₹) | % of project cost |
|---|---|---|
| Promoter's own contribution | 2,00,000 | 20.00% |
| Term loan under MUDRA Tarun | 8,00,000 | 80.00% |
| Subsidy / margin money grant | Nil | — |
| Total | 10,00,000 | 100.00% |
Promoter's contribution is held in Savings A/c No. XXXXXX4417 with Punjab National Bank, Vaishali Nagar (statement enclosed). Debt–equity at inception is 4.00 : 1, improving to 1.65 : 1 by the end of Year 1.
For PMEGP, PMFME, NABARD and state-subsidy proposals this section additionally carries the margin-money subsidy workings, the subsidy-adjusted repayment and a second DSCR computed net of subsidy.
| Equipment | Qty | Rate (₹) | Amount (₹) |
|---|---|---|---|
| BGA rework station with preheater | 1 | 95,000 | 95,000 |
| Digital storage oscilloscope with probes | 1 | 45,000 | 45,000 |
| Universal IC programmer | 1 | 35,000 | 35,000 |
| Ultrasonic PCB cleaning unit | 1 | 22,000 | 22,000 |
| Soldering / desoldering stations | 3 | 8,000 | 24,000 |
| Precision tool kits & ESD workbench | 2 | 9,500 | 19,000 |
| Total | 2,40,000 |
Suppliers: Fine Tools India (Jaipur), Sagar Electronics (Delhi), Techno Instruments (Jaipur). Quotations enclosed at Annexure IX. Delivery within 30 days of sanction; installation by the supplier at no extra cost.
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| Service & repair income | 24.00 | 28.32 | 32.57 | 36.80 | 41.22 |
| Sale of spares & accessories | 9.60 | 11.33 | 13.03 | 14.73 | 16.49 |
| Total revenue | 33.60 | 39.65 | 45.60 | 51.53 | 57.71 |
| Cost of spares & materials (45%) | 15.12 | 17.84 | 20.52 | 23.19 | 25.97 |
| Gross profit | 18.48 | 21.81 | 25.08 | 28.34 | 31.74 |
| Salaries & wages | 6.72 | 7.26 | 7.84 | 8.47 | 9.14 |
| Rent | 1.44 | 1.51 | 1.59 | 1.67 | 1.75 |
| Power & fuel | 0.72 | 0.78 | 0.83 | 0.89 | 0.95 |
| Repairs & maintenance | 0.30 | 0.33 | 0.36 | 0.39 | 0.42 |
| Marketing & business promotion | 0.36 | 0.40 | 0.44 | 0.48 | 0.52 |
| Administrative & miscellaneous | 0.60 | 0.66 | 0.72 | 0.78 | 0.84 |
| Insurance | 0.12 | 0.13 | 0.14 | 0.15 | 0.16 |
| Total operating expenses | 10.26 | 11.07 | 11.92 | 12.83 | 13.78 |
| EBITDA | 8.22 | 10.74 | 13.16 | 15.51 | 17.96 |
| Depreciation (WDV, as per IT Act) | 0.86 | 0.66 | 0.52 | 0.42 | 0.35 |
| EBIT | 7.36 | 10.08 | 12.64 | 15.09 | 17.61 |
| Interest on term loan | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Profit before tax | 6.58 | 9.44 | 12.16 | 14.78 | 17.50 |
| Income tax (as applicable) | 0.30 | 0.62 | 0.95 | 1.35 | 1.80 |
| Profit after tax | 6.28 | 8.82 | 11.21 | 13.43 | 15.70 |
Revenue grows 18%, 15%, 13% and 12% over the five years, against 22% achieved by the unit in the last audited year. Capacity utilisation moves from 72% to 91%; the projections do not assume any increase in service rates.
| Year | Opening balance | Principal repaid | Interest | Total outgo | Closing balance |
|---|---|---|---|---|---|
| 1 | 8,00,000 | 1,28,404 | 77,937 | 2,06,341 | 6,71,596 |
| 2 | 6,71,596 | 1,42,555 | 63,787 | 2,06,341 | 5,29,041 |
| 3 | 5,29,041 | 1,58,265 | 48,077 | 2,06,341 | 3,70,776 |
| 4 | 3,70,776 | 1,75,706 | 30,635 | 2,06,341 | 1,95,070 |
| 5 | 1,95,070 | 1,95,070 | 11,272 | 2,06,341 | Nil |
| Total | 8,00,000 | 2,31,707 | 10,31,705 |
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| Profit after tax | 6.28 | 8.82 | 11.21 | 13.43 | 15.70 |
| Add: depreciation | 0.86 | 0.66 | 0.52 | 0.42 | 0.35 |
| Add: interest on term loan | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Cash available for debt service (A) | 7.92 | 10.12 | 12.21 | 14.16 | 16.16 |
| Principal repayment | 1.28 | 1.43 | 1.58 | 1.76 | 1.95 |
| Interest | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Total debt service (B) | 2.06 | 2.07 | 2.06 | 2.07 | 2.06 |
| DSCR (A ÷ B) | 3.84 | 4.89 | 5.93 | 6.84 | 7.84 |
Average DSCR over the tenure: 5.87. The minimum acceptable to banks is 1.25; the unit crosses that threshold even if Year-1 revenue falls 60% short of projection.
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| LIABILITIES | |||||
| Capital account (net of drawings) | 4.08 | 7.50 | 12.11 | 17.74 | 24.44 |
| Term loan — long-term portion | 5.29 | 3.71 | 1.95 | — | — |
| Term loan — current maturity | 1.43 | 1.58 | 1.76 | 1.95 | — |
| Sundry creditors (30 days) | 1.26 | 1.49 | 1.71 | 1.93 | 2.16 |
| Other current liabilities & provisions | 0.30 | 0.35 | 0.40 | 0.45 | 0.50 |
| Total | 12.36 | 14.63 | 17.93 | 22.07 | 27.10 |
| ASSETS | |||||
| Net fixed assets | 4.14 | 3.48 | 2.96 | 2.54 | 2.19 |
| Stock of spares (45 days) | 1.86 | 2.20 | 2.53 | 2.86 | 3.20 |
| Sundry debtors (10 days) | 0.92 | 1.09 | 1.25 | 1.41 | 1.58 |
| Cash & bank balance | 5.44 | 7.86 | 11.19 | 15.26 | 20.13 |
| Total | 12.36 | 14.63 | 17.93 | 22.07 | 27.10 |
| Sources | Amount | Applications | Amount |
|---|---|---|---|
| Profit after tax | 6.28 | Capital expenditure | 5.00 |
| Depreciation | 0.86 | Increase in stock | 1.86 |
| Increase in creditors & provisions | 1.56 | Increase in debtors | 0.92 |
| Term loan drawn | 8.00 | Repayment of term loan | 1.28 |
| Promoter's capital introduced | 2.00 | Drawings | 4.20 |
| Closing cash & bank | 5.44 | ||
| Total | 18.70 | Total | 18.70 |
Working capital is assessed under the Tandon Committee Method II, the basis used by banks for limits up to ₹5 crore. The workings below are drawn from the Year-1 projections above.
| Particulars | Amount |
|---|---|
| Stock of spares | 1.86 |
| Sundry debtors | 0.92 |
| Cash & bank balance | 5.44 |
| Total current assets (TCA) | 8.22 |
| Sundry creditors | 1.26 |
| Other current liabilities & provisions | 0.30 |
| Current maturity of term loan | 1.43 |
| Other current liabilities (OCL) | 2.99 |
| Working capital gap (TCA − OCL) | 5.23 |
| 25% of TCA — stipulated margin | 2.06 |
| Maximum permissible bank finance (Method II) | 3.18 |
No cash-credit limit is sought in this proposal; the assessment is presented because bank officers ask for it. Were the limit of ₹3.18 lakh availed, the current ratio would stand at 1.33 — above the 1.25 stipulated by IBA.
CMA statements included in the full report
| Ratio | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 | Bank norm |
|---|---|---|---|---|---|---|
| Current ratio | 2.75 | 3.26 | 3.87 | 4.51 | 9.36 | ≥ 1.25 |
| Debt–equity ratio | 1.65 | 0.71 | 0.31 | 0.11 | Nil | ≤ 3.00 |
| DSCR | 3.84 | 4.89 | 5.93 | 6.84 | 7.84 | ≥ 1.25 |
| Net profit margin | 18.7% | 22.2% | 24.6% | 26.1% | 27.2% | — |
| Interest coverage | 9.4 | 15.8 | 26.3 | 48.7 | 160.1 | ≥ 2.00 |
| Particulars | Amount |
|---|---|
| Fixed costs (salaries, rent, admin, depreciation, interest) | 10.88 |
| Variable costs (materials, power, maintenance) | 16.14 |
| Contribution (revenue − variable costs) | 17.46 |
| P/V ratio | 51.96% |
| Break-even sales | 20.94 |
| Break-even as % of Year-1 revenue | 62.3% |
| Cash break-even as % of Year-1 revenue | 57.4% |
Strengths
Weaknesses
Opportunities
Threats
Free to generate · ₹499 for the clean PDF + Word + Excel · 30-day money-back guarantee
Create your account in 30 seconds — no credit card needed.
Enter applicant details, select the scheme, set your loan amount.
The full report is drafted for you — financials, projections and CMA data — in under 60 seconds.
Preview free, then download the clean PDF plus Word (.docx) + Excel (.xlsx) once unlocked. Submit to bank or DIC office.
MUDRA Kishor format + embroidery unit economics combined correctly.
Subsidy/margin money for MUDRA Kishor auto-computed.
Project cost ₹2–20 Lakh, NIC 13993.
CMA, DSCR ≥ 1.50, 5-year projections.
Editable; Word + Excel exports; first report free.
Yes — MUDRA Kishor (₹50K–₹5L) is commonly used for embroidery unit. The report is formatted to MUDRA Kishor requirements with subsidy/margin money shown.
₹50K–₹5L — computed automatically in the means-of-finance and subsidy sections.
Register free, pick the scheme & loan amount, and the full bank-ready report is drafted for you (CMA data, DSCR, 5-year projections) in under 60 seconds. First report free; clean exports ₹499.
The maximum loan amount under MUDRA Kishor is ₹5 lakh. The project cost can be up to ₹20 lakh, but the loan component is capped at ₹5 lakh. The remaining amount must be arranged as promoter's contribution or from other sources.
There is no direct subsidy under MUDRA. However, the loan is covered under CGTMSE, eliminating collateral requirement. Additionally, interest subvention of 2% per annum is available for women and SC/ST entrepreneurs under some state schemes. Check with your bank for state-specific subsidies like PMEGP or PM Vishwakarma.
Yes, but you need a strong project report demonstrating market potential and your skill training. Banks prefer applicants with at least 6 months of experience or formal training in embroidery. You can enhance your application by completing a course under PM Vishwakarma or similar skill development programs.
For a small unit, a single-head computerized embroidery machine (e.g., Tajima or Barudan) costing ₹1.5–3 lakh is sufficient. Additional equipment includes thread stand, scissors, hoops, and a computer with design software. Total machinery cost typically ranges from ₹2–4 lakh for a startup.