Bank-ready cattle feed plant project report for Asansol, West Bengal — with CMA data, DSCR ≥ 1.50 and 5-year projections for NABARD, PMEGP, CGTMSE.
Free preview • No credit card • Ready in 60 seconds
Setting up a cattle feed plant in Asansol, West Bengal, is a promising agri-processing venture under NIC 10801, with typical project costs ranging from ₹15 Lakh to ₹1 Crore. A bank-ready project report is critical for securing loans and subsidies through schemes like NABARD, PMEGP, and CGTMSE. This report includes detailed CMA data, Debt Service Coverage Ratio (DSCR) analysis, and 5-year financial projections, ensuring lenders assess viability. For Asansol, factors like local raw material availability (rice bran, maize, de-oiled cake) and proximity to dairy clusters in Bardhaman district enhance feasibility. The report covers project cost breakdown, working capital needs, machinery specifications, and subsidy eligibility. With NABARD refinancing and PMEGP capital subsidy (up to ₹35 lakh for general category), a well-prepared report speeds up loan approval. Our content is tailored for entrepreneurs and CAs seeking practical guidance for this specific location.
Any Indian citizen above 18 years with a viable project can apply. For PMEGP, general category gets 25% subsidy (max ₹35 lakh) and special categories 35% (max ₹35 lakh). NABARD offers refinance through commercial banks for agri-processing units, with no direct subsidy but lower interest rates. CGTMSE provides collateral-free coverage up to ₹2 crore for MSMEs, ideal for first-generation entrepreneurs in Asansol. The unit must be located in a non-polluting zone; Asansol Municipal Corporation issues necessary NOCs. Priority is given to projects using local raw materials and creating employment for local youth.
A typical 1-2 ton per hour plant in Asansol costs ₹25-50 lakh. Major components: land (₹5-10 lakh, 1000-2000 sq ft), machinery (hammer mill, mixer, pelletizer, cooler, packing unit: ₹12-25 lakh), electricals & installation (₹3-5 lakh), raw material inventory (₹3-8 lakh), and working capital (₹2-5 lakh). Bank loan covers 75-90% of project cost. Under PMEGP, margin money is 10-15% (subsidy covers part). NABARD refinance requires 10-20% promoter contribution. DSCR should be above 1.25; typical repayment 5-7 years at 9-11% interest. Subsidy is released after loan disbursement and unit inspection.
For bank loan: project report with CMA, land documents (lease/sale deed), NOC from pollution board, machinery quotations, electricity load letter, and KYC of promoters. For PMEGP: caste certificate (if applicable), educational proof (minimum 8th pass), and project report. For CGTMSE: no collateral, but bank may ask for personal guarantee. Asansol-specific: trade license from Asansol Municipal Corporation, GST registration, and FSSAI license (if selling branded feed). Ensure all documents are notarized and submitted in duplicate. A CA can help prepare financial statements and tax returns for the last 3 years.
Every report is formatted to the exact standards required by Indian banks and government departments.
A complete 14-section project report — the same document your bank officer will read. Every table below is real: the repayment schedule, the DSCR, the CMA workings, the balance sheet. Generate yours free, then pay ₹499 for the clean copy.
Project Report
Consumer electronics repair, servicing & spare-parts retail
Vaishali Nagar, Jaipur, Rajasthan
Submitted to the Branch Manager · Punjab National Bank, Vaishali Nagar, Jaipur
The unit has been in operation since 2019 and currently services 20–25 jobs a day from a 350 sq.ft. ground-floor shop, with a recorded customer base of 600+ households in the Vaishali Nagar catchment. The promoter proposes to expand the workbench capacity, add board-level diagnostic equipment and carry a spare-parts inventory so that 70% of repairs can be completed same-day instead of the present 3-day turnaround.
The project is assessed at a cost of ₹10.00 lakh, financed by a ₹8.00 lakh MUDRA Tarun term loan and ₹2.00 lakh of promoter's own contribution (20%). At the projected turnover the unit services its debt 5.87 times over on average, against the 1.25 minimum, and breaks even at 62% of Year-1 sales — leaving substantial cushion against a demand shortfall.
Recommendation: the proposal is technically feasible, commercially viable and financially sound. It is recommended for sanction of a term loan of ₹8.00 lakh repayable in 60 monthly instalments.
| Particulars | Basis | Amount (₹) |
|---|---|---|
| Renovation & civil work | 200 sq.ft. additional area, electrical, ESD flooring | 1,20,000 |
| Diagnostic & repair equipment | As per quotations — Annexure IX | 2,40,000 |
| Computers, software & service tools | 2 systems, billing software, tool kits | 80,000 |
| Furniture, air-conditioning & display fixtures | Counter, racks, 1.5 T AC | 60,000 |
| Margin money for working capital | Stock, receivables & operating cash | 5,00,000 |
| Total project cost | 10,00,000 |
A 5% contingency is built into the civil and equipment estimates. All capital items are supported by three quotations each.
| Source | Amount (₹) | % of project cost |
|---|---|---|
| Promoter's own contribution | 2,00,000 | 20.00% |
| Term loan under MUDRA Tarun | 8,00,000 | 80.00% |
| Subsidy / margin money grant | Nil | — |
| Total | 10,00,000 | 100.00% |
Promoter's contribution is held in Savings A/c No. XXXXXX4417 with Punjab National Bank, Vaishali Nagar (statement enclosed). Debt–equity at inception is 4.00 : 1, improving to 1.65 : 1 by the end of Year 1.
For PMEGP, PMFME, NABARD and state-subsidy proposals this section additionally carries the margin-money subsidy workings, the subsidy-adjusted repayment and a second DSCR computed net of subsidy.
| Equipment | Qty | Rate (₹) | Amount (₹) |
|---|---|---|---|
| BGA rework station with preheater | 1 | 95,000 | 95,000 |
| Digital storage oscilloscope with probes | 1 | 45,000 | 45,000 |
| Universal IC programmer | 1 | 35,000 | 35,000 |
| Ultrasonic PCB cleaning unit | 1 | 22,000 | 22,000 |
| Soldering / desoldering stations | 3 | 8,000 | 24,000 |
| Precision tool kits & ESD workbench | 2 | 9,500 | 19,000 |
| Total | 2,40,000 |
Suppliers: Fine Tools India (Jaipur), Sagar Electronics (Delhi), Techno Instruments (Jaipur). Quotations enclosed at Annexure IX. Delivery within 30 days of sanction; installation by the supplier at no extra cost.
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| Service & repair income | 24.00 | 28.32 | 32.57 | 36.80 | 41.22 |
| Sale of spares & accessories | 9.60 | 11.33 | 13.03 | 14.73 | 16.49 |
| Total revenue | 33.60 | 39.65 | 45.60 | 51.53 | 57.71 |
| Cost of spares & materials (45%) | 15.12 | 17.84 | 20.52 | 23.19 | 25.97 |
| Gross profit | 18.48 | 21.81 | 25.08 | 28.34 | 31.74 |
| Salaries & wages | 6.72 | 7.26 | 7.84 | 8.47 | 9.14 |
| Rent | 1.44 | 1.51 | 1.59 | 1.67 | 1.75 |
| Power & fuel | 0.72 | 0.78 | 0.83 | 0.89 | 0.95 |
| Repairs & maintenance | 0.30 | 0.33 | 0.36 | 0.39 | 0.42 |
| Marketing & business promotion | 0.36 | 0.40 | 0.44 | 0.48 | 0.52 |
| Administrative & miscellaneous | 0.60 | 0.66 | 0.72 | 0.78 | 0.84 |
| Insurance | 0.12 | 0.13 | 0.14 | 0.15 | 0.16 |
| Total operating expenses | 10.26 | 11.07 | 11.92 | 12.83 | 13.78 |
| EBITDA | 8.22 | 10.74 | 13.16 | 15.51 | 17.96 |
| Depreciation (WDV, as per IT Act) | 0.86 | 0.66 | 0.52 | 0.42 | 0.35 |
| EBIT | 7.36 | 10.08 | 12.64 | 15.09 | 17.61 |
| Interest on term loan | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Profit before tax | 6.58 | 9.44 | 12.16 | 14.78 | 17.50 |
| Income tax (as applicable) | 0.30 | 0.62 | 0.95 | 1.35 | 1.80 |
| Profit after tax | 6.28 | 8.82 | 11.21 | 13.43 | 15.70 |
Revenue grows 18%, 15%, 13% and 12% over the five years, against 22% achieved by the unit in the last audited year. Capacity utilisation moves from 72% to 91%; the projections do not assume any increase in service rates.
| Year | Opening balance | Principal repaid | Interest | Total outgo | Closing balance |
|---|---|---|---|---|---|
| 1 | 8,00,000 | 1,28,404 | 77,937 | 2,06,341 | 6,71,596 |
| 2 | 6,71,596 | 1,42,555 | 63,787 | 2,06,341 | 5,29,041 |
| 3 | 5,29,041 | 1,58,265 | 48,077 | 2,06,341 | 3,70,776 |
| 4 | 3,70,776 | 1,75,706 | 30,635 | 2,06,341 | 1,95,070 |
| 5 | 1,95,070 | 1,95,070 | 11,272 | 2,06,341 | Nil |
| Total | 8,00,000 | 2,31,707 | 10,31,705 |
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| Profit after tax | 6.28 | 8.82 | 11.21 | 13.43 | 15.70 |
| Add: depreciation | 0.86 | 0.66 | 0.52 | 0.42 | 0.35 |
| Add: interest on term loan | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Cash available for debt service (A) | 7.92 | 10.12 | 12.21 | 14.16 | 16.16 |
| Principal repayment | 1.28 | 1.43 | 1.58 | 1.76 | 1.95 |
| Interest | 0.78 | 0.64 | 0.48 | 0.31 | 0.11 |
| Total debt service (B) | 2.06 | 2.07 | 2.06 | 2.07 | 2.06 |
| DSCR (A ÷ B) | 3.84 | 4.89 | 5.93 | 6.84 | 7.84 |
Average DSCR over the tenure: 5.87. The minimum acceptable to banks is 1.25; the unit crosses that threshold even if Year-1 revenue falls 60% short of projection.
| Particulars | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 |
|---|---|---|---|---|---|
| LIABILITIES | |||||
| Capital account (net of drawings) | 4.08 | 7.50 | 12.11 | 17.74 | 24.44 |
| Term loan — long-term portion | 5.29 | 3.71 | 1.95 | — | — |
| Term loan — current maturity | 1.43 | 1.58 | 1.76 | 1.95 | — |
| Sundry creditors (30 days) | 1.26 | 1.49 | 1.71 | 1.93 | 2.16 |
| Other current liabilities & provisions | 0.30 | 0.35 | 0.40 | 0.45 | 0.50 |
| Total | 12.36 | 14.63 | 17.93 | 22.07 | 27.10 |
| ASSETS | |||||
| Net fixed assets | 4.14 | 3.48 | 2.96 | 2.54 | 2.19 |
| Stock of spares (45 days) | 1.86 | 2.20 | 2.53 | 2.86 | 3.20 |
| Sundry debtors (10 days) | 0.92 | 1.09 | 1.25 | 1.41 | 1.58 |
| Cash & bank balance | 5.44 | 7.86 | 11.19 | 15.26 | 20.13 |
| Total | 12.36 | 14.63 | 17.93 | 22.07 | 27.10 |
| Sources | Amount | Applications | Amount |
|---|---|---|---|
| Profit after tax | 6.28 | Capital expenditure | 5.00 |
| Depreciation | 0.86 | Increase in stock | 1.86 |
| Increase in creditors & provisions | 1.56 | Increase in debtors | 0.92 |
| Term loan drawn | 8.00 | Repayment of term loan | 1.28 |
| Promoter's capital introduced | 2.00 | Drawings | 4.20 |
| Closing cash & bank | 5.44 | ||
| Total | 18.70 | Total | 18.70 |
Working capital is assessed under the Tandon Committee Method II, the basis used by banks for limits up to ₹5 crore. The workings below are drawn from the Year-1 projections above.
| Particulars | Amount |
|---|---|
| Stock of spares | 1.86 |
| Sundry debtors | 0.92 |
| Cash & bank balance | 5.44 |
| Total current assets (TCA) | 8.22 |
| Sundry creditors | 1.26 |
| Other current liabilities & provisions | 0.30 |
| Current maturity of term loan | 1.43 |
| Other current liabilities (OCL) | 2.99 |
| Working capital gap (TCA − OCL) | 5.23 |
| 25% of TCA — stipulated margin | 2.06 |
| Maximum permissible bank finance (Method II) | 3.18 |
No cash-credit limit is sought in this proposal; the assessment is presented because bank officers ask for it. Were the limit of ₹3.18 lakh availed, the current ratio would stand at 1.33 — above the 1.25 stipulated by IBA.
CMA statements included in the full report
| Ratio | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 | Bank norm |
|---|---|---|---|---|---|---|
| Current ratio | 2.75 | 3.26 | 3.87 | 4.51 | 9.36 | ≥ 1.25 |
| Debt–equity ratio | 1.65 | 0.71 | 0.31 | 0.11 | Nil | ≤ 3.00 |
| DSCR | 3.84 | 4.89 | 5.93 | 6.84 | 7.84 | ≥ 1.25 |
| Net profit margin | 18.7% | 22.2% | 24.6% | 26.1% | 27.2% | — |
| Interest coverage | 9.4 | 15.8 | 26.3 | 48.7 | 160.1 | ≥ 2.00 |
| Particulars | Amount |
|---|---|
| Fixed costs (salaries, rent, admin, depreciation, interest) | 10.88 |
| Variable costs (materials, power, maintenance) | 16.14 |
| Contribution (revenue − variable costs) | 17.46 |
| P/V ratio | 51.96% |
| Break-even sales | 20.94 |
| Break-even as % of Year-1 revenue | 62.3% |
| Cash break-even as % of Year-1 revenue | 57.4% |
Strengths
Weaknesses
Opportunities
Threats
Free to generate · ₹499 for the clean PDF + Word + Excel · 30-day money-back guarantee
Create your account in 30 seconds — no credit card needed.
Enter applicant details, select the scheme, set your loan amount.
The full report is drafted for you — financials, projections and CMA data — in under 60 seconds.
Preview free, then download the clean PDF plus Word (.docx) + Excel (.xlsx) once unlocked. Submit to bank or DIC office.
Localised for Asansol: addresses, NIC code 10801 and West Bengal cost assumptions are pre-filled.
Scheme-ready for NABARD, PMEGP, CGTMSE — eligibility, subsidy and margin money handled automatically.
Bankable financials: P&L, Balance Sheet, Cash Flow, CMA data and DSCR ≥ 1.50, the way Asansol branches expect.
Editable & re-generatable — adjust loan amount, machinery or turnover and re-download instantly.
Word + Excel exports so your CA or the DIC office in Asansol can fine-tune figures.
Used by entrepreneurs, CAs and loan agents across East India.
Yes. The report follows RBI/IBA formatting with CMA data, DSCR and 5-year projections, and is accepted by SBI, PNB, Bank of Baroda, Canara Bank and other nationalised and private banks across Asansol and West Bengal, as well as the local DIC office for subsidy schemes.
Most cattle feed plant projects in Asansol fall in the ₹15 Lakh–1 Cr range. Under NABARD (agri capital subsidy) and other schemes like NABARD, PMEGP, CGTMSE, banks typically fund 75–90% of the project cost as term loan plus working capital, with the balance as promoter contribution.
For a cattle feed plant, the most commonly used schemes are NABARD, PMEGP, CGTMSE. The report is configured to match whichever scheme you choose at generation time.
Aadhaar, PAN, address proof for Asansol, passport photos, quotations for machinery/equipment, Udyam (MSME) registration and bank statements. The project report itself is generated by Cred — you only attach your KYC and quotations.
Under 60 seconds. Fill the form, pick your scheme and loan amount, and the full report is drafted with Asansol-specific assumptions. The first report is free; clean Word/Excel/PDF exports are ₹499.
Yes. Every report is fully editable and exports to Word (.docx) and Excel (.xlsx), so your CA or consultant in Asansol can adjust projections, machinery costs or working capital before submitting to the bank.
Loan amounts range from ₹15 lakh to ₹1 crore, with interest rates between 9% and 11% per annum. Under NABARD refinance, rates may be lower by 0.5-1%. PMEGP loans have fixed rates around 9-10%. CGTMSE coverage ensures no collateral for loans up to ₹2 crore.
Loan approval typically takes 4-8 weeks after submitting a complete project report. PMEGP subsidy is released in two installments: 50% after loan disbursement and 50% after unit inspection (within 6 months). NABARD refinance is faster if the bank is empaneled. Total time from application to subsidy receipt: 3-6 months.
Asansol is near Bardhaman and Bankura districts, which produce rice bran, de-oiled cake (mustard/groundnut), maize, wheat bran, and molasses. Local availability reduces transport cost. You can also source mineral mixtures and vitamins from Kolkata (200 km). Ensure quality testing for aflatoxins.